• TagMate attaches an EAS tag to apparel and provides several measures of extra protection against theft
• TagMate's local alarm allows store personel to pinpoint the location of the merchandise being tampered with inside of the store
• TagMate also allows store personel to locate any stolen merchandise that has already been removed from the store
• TagMate is lighter and more functional than existing "alarming tags"
• Use existing EAS Tags and EAS Detachers
  

TagMate Alarm Conditions

• If the TagMate is forcibly pulled from the EAS tag or the lanyard is cut, the TagMate, itself, sounds a 90 decibel alarm (until reset). A red LED lights for the duration of the alarm.
• The TagMate will activate a 58 kHz Sensormatic accousto magnetic (AM) systems (even if it is not attached to an EAS tag) as it passes through the system detection zone.
• The transmitted signal from the EAS system will activate the internal alarm in the TagMate. A red LED light will illuminate for the duration of the alarm. TagMate alarm will sound until reset.
• The TagMate's alarm function can be reset with an EAS tag pin, paperclip, or other pin-like tool. After the TagMate has been removed from the EAS Tag. Gently push the pin into the hole located near the base of the TagMate's pin. The alarm will cease, and the red LED will shut off. When properly attached to an EAS tag, the reset hole should be covered thus prohibiting the cancellation of the alarm.
  

TagMate Features

• Dimensions / weight - 1.7" (45mm) x 1.3" (34mm) x 7" (18mm) / .7 ounces (20 grams).
• Description of pin - 4 grooved or smooth 0.7" (17.5mm) stainless steel pin that is fully compatible with Sensormatic, Checkpoint, and most other EAS tags.
• 8.2 MHz Radio-Frequency (RF) version also available.
• Lanyard Lengths - 20 cm (8"), 70 cm (27"), and 120 cm (47").
• Battery Replacement - Factory replacement available.
• Warranty - 2 years protection against manufacturers defects.